Power Supply
Model - KM PS 302AB / 303AB / 305AB
Features
• High Stability
• ON/OFF output switch
• Fixed 3.3V / 5V Supply output
• Constant Current / Constant Voltage auto switch
• Coarse & fine adjustment setting for both Voltage & Current.
• Full scale long duration time output.
• 3 digit display for Voltage & Current function respectively.
Model - KM PS 302DII / 303DII / 305DII
Features
• High Stability
• ON/OFF output switch
• Fixed 5V Supply output
• Coarse & fine adjustment setting for both Voltage & Current.
• Full scale long duration time output.
• 3 digit display for each Voltage & Current function.
Model - Dc Electronic Load Model - KM-mPD-501
KM-mPD-501 DC electronic load mainly focuses on the testing of power circuit on PCB. KM-mPD-501 offers a solution for function test of Switch step up, Stepdown, Regulators and Driver IC . Engineer puts components, such as CPU, DSP, FPGA; etc on a PCB after the power circuit has been tested. It’s not complete to use a meter to measure the voltage. KM-mPD-501 offers engineer OVP, OCP and OPP functions that help engineer know the value of overload current . On the other hand, engineer can use a programmable DC power supply (mPP series) to offer external power and connect PCB’s output to KM-mPD-501. Then engineer can easily get output watt, figure out the efficiency of power circuit and check if inductances, capacitances and resistances perfectly work with the power circuit. KM-mPD-501 not only offers loading emulation of current but also provides OVP and OPP. User can use these functions to test solar power battery, rechargeable battery and motor driver. In school laboratory, KM-mPD-501 helps students do experiment on power circuit, linear circuit and driver circuit.
Features
• Constant current (C.C) & constant voltage (C.V) emulation.
• Both of C.C and C.V mode have 3 sets of memory
• Display real time voltage, current and watt.
• Over current protection (O.C.P), over voltage protection (O.V.P) and over power protection (O.P.P).
Programmable DC Power Supply
KM-LPP-3030T provides a higher stability in terms of traditional Programmable DC Power Supply. KM-LPP-3030T, linear programmable DC Power Supply support USB PC-Link and two completely separate power outputs. With the various characteristics, KM-LPP-3030T is the best choice of power supplies for engineers. With the functions of the power supply of KM-LPP-3030T, it provides two completely separate power output which is able for series or parallel connection; other than the common power supplies on the market of positive / ground / negative output. In addition, KM-LPP-3030T supports low-voltage digital circuits, also it is able to switch voltage among 1.8V~5.0V. With its characteristics of stability and high - speed reaction, KM-LPP-3030T provides high quality at a very economical price.
Features
• Provide two completely separate power outputs. Users can obtain higher voltage, current, and positive & negative voltage applications by using series or parallel connection
• Support low-voltage digital circuits: Provides fixed power output also it is able to switch voltage among 1.8 V~5.0
• OVP (Over voltage protection) / OCP (Over current protection) functions: For each programmable output, users can set desired protective voltage or current value. ? V.Set Limit function: Sets the limit of the maximum voltage.
• When keypad is loked, user can not change the setting of voltage and current. The LPP will be locked even if user restarts the LPP.
• Supply high resolution of V (voltage) / I (current) for measurement: The resolution of V (voltage) / I (current) can raised up to 10mV / 1mA.
• Memory storage: Memorizes up to 10 formats setting of OCP, OVP and V.Set Limit.
• USB Interface: Use USB interface to offer PC-Link function to be able to write the control programs, save data and PC-Remote with simple command text format.