600A AC True RMS Digital Clampmeter With VFD, EF-detection, Amptip Function For Low Current Measurement
Model KM 072
Special Features
• AmpTip ™ low-current range calibrated at Jaw-tip for slim-conditions for accurate readings
• MAX/MIN/AVG Recording mode (Auto ranging)
• VFD-V & Hz for fundamental V/Hz of most Variable-Frequency-Drives
• Display Hold & Non-Contact EF-Detection (NCV)
• Probe-Contact EF-Detection.
General Specifications
• Sensing : AC; True RMS
• Jaws Opening size & conductor diameter : 30mm Max.
• Display : 3-5/6 digits 6000 counts
• Update Rate : 5 per second nominal
• Polarity : Automatic
• Operating Temperature : 0° C to 40° C
• Relative Humidity :
- Maximum relative humidity 80% for temperature up to 31 °C decreasing linearly to 50% relative humidity at 40° C
• Altitude : Operating below 2000m
• Storage Temperature : -20 °C ~ 60 °C, <80% R.H. (with battery removed)
• Temperature Coefficient : Nominal 0.15 x (specified accuracy) /
° C @ (0 ° C - 18 ° C or 28 ° C - 40 ° C), or otherwise specified
• Power Supply : Standard 1.5V AAA Size Battery X 2
• Power Consumption : typical 4.3mA
• Low Battery :
- Below approx. 2.85V for Capacitance & Hz
- Below approx. 2.5V for other functions
• APO timing : Idle for 32 minutes
• APO Consumption : typical 5 µA
• Dimension : 217(L) x 76(W) x 37(H)mm
• Weight : approx 186 gms.