6000 Counts Dual Display TRMS Digital Multimeter With VFD Feature
MODEL KM 5040T
Special Features
• Basic DC Voltage Accuracy : 0.08%
• 50ms record MAX-MIN readings at fast 20 / second measurement mode
• 0.8ms Crest (instantaneous Peak-HOLD)
• Data Hold & Range- Hold
• Backlighted Display
• Autoranging
• MAX-MIN readings
• Fire retarded casing.
• Diode & Continuity Test
• Type-K Temperature
• Audible & Visible BeepJack ™ Input warning against improper plug in.
• Relative-Zero offset mode
• Zoom 5x Analog pointer at 60/s
• Auto power off
• PC Interface (BRUA-85Xa) (Optional)
General Specification
• Sensing : AC True RMS
• Display : 3-4/5 digits 5000 counts LCD display
• Update Rate : Fast data : 5 / second nominal;
• 52 Segment Bar-graph : 60 per second nominal.
• Operating Temperature : 0°C to 45°C
• Relative Humidity : Maximum 80% R.H. for Temperature upto 31°C decreasing linearly to 50% R.H. at 45°C
• Storage Temperature : -20°C to 60°C, 80% R.H. (With battery removed)
• Pollution degree : 2
• Altitude : Operating below 2000m
• Temperature Coefficient : Nominal 0.15 x (specified accuracy) / °C @ (0°C ~ 18°C or 28°C ~ 45°C), or otherwise specified.
• Power Consumption : 4.3mA typical
• Low Battery : Below approx. 7V
• APO Timing : Idle for 17 minutes.
• APO Consumption : 50mA typical
• Power Supply : Single 9V battery.
• Dimension : Approx.186(L)mm x 87(W)mm x 35.5(H)mm; 198(L)mm x 97(W)mm x 55(H)mm with holster
• Weight : Approx.340gm, Approx. 430gm with holster.