1000A AC True Rms Digital Clampmeter With VFD, EF-Detection, Amptip Function For Low Current Measurement & 3 Phase Rotation Check Function & 3 Phase Sequence Indication
Model KM 086 ( 25 Functions 32 Ranges )
Special Features
• AmpTip ™ low-current range calibrated at Jaw-tip for slim-conditions for accurate readings
• MAX/MIN/AVG Recording mode (Auto ranging)
• VFD-V & Hz for fundamental V/Hz of most Variable-Frequency-Drives
• Display Hold & Non-Contact EF-Detection (NCV)
• Back-lighted easy-to-read LCD display
• Fast 80ms Peak-RMS mode to capture in-rush currents
• Auto-ranging Relative mode with DCZero mode & 5ms Crest
(Instantaneous Peak-Hold) mode
• 3-Phase Rotation-R for MAINS supply (Probe contact)
• 3-Phase Rotation-M (Hi-sensitivity mode) for Motors (Probe-contact)
Specifications
• Sensing : AC;True RMS
• Jaws Opening size & conductor diameter : 30mm Max.
• Display : 3-5/6 digits 6000 counts
• Update Rate : 5 per second nominal
• Polarity : Automatic
• Operating Temperature : -10 ºC to 40 ºC
• Relative Humidity : Non condensing ( <10ºC) Maximum 90%R.H. at 10-30°C
decreasing linearly to 75% R.H. at 30-40°C & 45% R.H. at 40-50°C
• Altitude : Operating below 2000m, Storage below 12000m
• Storage Temperature : -20 °C ~ 60 °C, <80% R.H. (with battery removed)
• Temperature Coefficient : Nominal 10.0 x (specified accuracy) /
°C @ (-10 °C- 18 °C or 28 °C - 50 °C),
or otherwise specified
• Power Supply : Standard 1.5V AA Battery X 2
• Power Consumption : typical 4.3 mA
• Low Battery:
Below approx. 2.85V for Capacitance & Hz
Below approx. 2.5V for other functions
• APO timing : Idle for 32 minutes
• APO Consumption : typical 5µA
• Dimension : 217(L) x 76(W) x 37(H)mm
• Weight: : approx 312 gms..