AC / DC Digital Clampmeter With Data Logging Function & PC Interface
FOR SOLAR APPLICATIONS

Model KM 2009 (6 Functions 2 Ranges)

General Specification

Sensing : Average sensing
Jaw Opening Size : 40mm
Function :
  Measurement of AC / DC current,
  upto 600A & On-line measurement.
Display Size : 32mm x 15mm
Test Mode : Clip-on CT, Integral mode.
Display Mode : Four Digit LCD display.
LCD Dimension : 35mm x 21.5mm
Sampling Rate : About 2times/s
AC/DC Current Range : 0.0A ~600A
Frequency Range : 45Hz ~ 400Hz
Resolution : 0.1A
Accuracy : ±2%rdg + 3dgts
Line voltage : Line test under AC600V
Data Hold : Display shows “DH” symbol.
Out of Range : Display shows “OL” symbol.
Data Storage : 99 groups, all used when display “FULL”
Power Consumption : about 10mW

Peak Hold : Press "HOLD" without release, the meter will show the peak value.
Battery Voltage : " " indicating the battery voltage is lower then 7.2V. Then the battery have to be changed.
Operating Temperature and Humidity : 0 °C ~ 40°C : below 80% R.H.
Storage Temperature and Humidity : -10 °C ~ 60 °C : below 70%rh
Insulation Strength : AC 2kV/rms (between the alloy of the clamp & housing)
Auto Power Off : 5 minutes after power on, it will power off automatically to lower the power consumption.
Power : Standard 9V battery.
Dimension : 175(W) x 70(H) x 38(T)mm
Weight : Approx. 180g (with battery)

Manual Online   View Catalog     Send Enquiry