600A AC True Rms Digital Clampmeter VFD, EF-detection, Amptip Function For Low Current Measurement & 3 Phase Rotation Check Function & 3 Phase Sequence Indication

Model KM 076 - 25 Functions 23 Ranges

Special Features
• AmpTip ™ low-current range calibrated at Jaw-tip for slim-conditions
  for accurate readings
•  MAX/MIN/AVG Recording mode (Auto ranging)
•  VFD-V & Hz for fundamental V/Hz of most Variable-Frequency-Drives
•  Display Hold & Non-Contact EF-Detection (NCV)
•  Back-lighted easy-to-read LCD display
•  Fast 80ms Peak-RMS mode to capture in-rush currents
•  Auto-ranging Relative mode with DC-Zero mode & 5ms Crest
  (Instantaneous Peak-Hold) mode
•  3-Phase Rotation-R for MAINS supply (Probe contact)
•  3-Phase Rotation-M (Hi-sensitivity mode) for Motors (Probe-contact)

Specifications
Sensing : AC;True RMS
Jaws Opening size & conductor diameter : 30mm Max.
Display : 3-5/6 digits 6000 counts
Update Rate : 5 per second nominal
Polarity : Automatic
Operating Temperature :0ºC to 40ºC
Relative Humidity : Maximum relative humidity 80% for temperature up to 31ºC
  decreasing linearly to 50% relative humidity at 40ºC
Altitude : Operating below 2000m
Storage Temperature : -20 °C ~ 60 °C, <80% R.H. (with battery removed)
Temperature Coefficient : Nominal 0.15 x (specified accuracy) / °C @ (0°C - 18°C or 28°C - 40°C), or otherwise specified
Power Supply : Standard 1.5V AAA Size Battery X 2
Power Consumption : typical 4.3mA
Low Battery: Below approx. 2.85V for Capacitance & Hz Below approx. 2.5V for other functions
APO timing : Idle for 32 minutes
APO Consumption : typical 5µA
Dimension : 217(L) x 76(W) x 37(H)mm
Weight : approx 186 gms.

  Manual Online     View Catalog     Send Enquiry